1. Surge tank cover
1
1. Intake air pipe
2. Surge tank pipe
1. Accelerator cable
2. A / T throttle cable
3. Water hose
1. Injector wire
2. Brake booster hose
3. IAC valve coupler
1. TP sensor
4. Earth wires
2. MAF sensor
5. Clamp bracket
6) Remove surge tank cover.
7) Remove air cleaner upper case, intake air hose, intake air pipe
and surge tank pipe as one component. Do not disassemble
them, when removing and reinstalling.
2
8) Disconnect accelerator cable and A/T throttle cable (for A/T
vehicle) from throttle body.
9) Disconnect water hoses from throttle body.
10) Disconnect injector wire coupler.
11) Disconnect brake booster hose from intake manifold.
12) Disconnect couplers of TP sensor, MAF sensor and IAC valve.
13) Disconnect earth terminal from intake collector.
14) Remove clamp bracket from intake collector.
ENGINE MECHANICAL (H25 ENGINE) 6A2-9