VALVES AND CYLINDER HEAD
REMOVAL
1) Relieve fuel pressure according to fuel pressure relief procedure
described in section 6.
2) Disconnect negative cable at battery.
3) Drain cooling system.
WARNING
D Check to make sure that engine coolant temperature is
cold before removing any part of cooling system.
D Also be sure to disconnect negative cable from battery
terminal before removing any part.
4) Remove intake manifold stiffener (1).
ENGINE MECHANICAL (G16 ENGINE) 6A1-41
1. Valve cotters
2. Valve spring retainer
3. Valve spring
4. Valve stem seal
5. Valve spring seat
6. Exhaust valve
7. Intake valve