Suzuki 2000 Grand Vitara SQ625 Service Manual page 490

1. Right side transmission stiffener
1. Exhaust No.1 pipe
5) Tighten torque converter bolts to specified torque (for A/T ve-
hicle).
Tightening Torque
.
(a): 65 N m (6.5 kg-m, 47.0 lb-ft)
6) Tighten transmission stiffener bolts to specified torque if
equipped.
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
7) Tighten bolts of exhaust No.1 pipe to specified torque.
Tightening Torque
.
(a): 50 N m (5.0 kg-m, 36.5 lb-ft)
8) Install front differential housing with differential to chassis. Re-
fer to Section 7E for installation.
9) Reverse disconnected hoses, cables and electric wires for
connection.
10) Adjust cooling fan belt tension, referring to Section 6B.
11) Adjust accelerator cable and A/T throttle cable (for A/T ve-
hicle) according to procedure described in Section 6E1.
12) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
13) Refill engine with engine oil referring to item "ENGINE OIL
CHANGE" in Section 0B.
14) Refill cooling system, referring to Section 6B.
15) Check to ensure that all fasteners and clamps are tightened.
16) Upon completion of installation, verify that there is no fuel leak-
age, coolant leakage or exhaust gas leakage at each connec-
tion.
ENGINE MECHANICAL (J20 ENGINE) 6A4-71