Suzuki 2000 Grand Vitara SQ625 Service Manual page 345

1. Upper oil pan
2. Oil pump strainer
3. Bracket
(d)
1. Gasket
2. Drain plug
5) Install upper oil pan to lower crankcase.
1. Upper oil pan
Tightening Torque
(b): 11.0 N
(c): 27.0 N
6) Install bracket to oil pump strainer and upper oil pan.
Tightening Torque
(d): 11 N
7) Apply sealant "A" to lower oil pan sealing surface area as
shown in figure.
"A": Sealant 99000-31150
8) Install lower oil pan to upper oil pan.
Tightening Torque
(e): 11 N
9) Install gasket and drain plug to oil pan.
Tightening Torque
(f): 35.0 N
10) Attach radiator outlet pipe to upper oil pan.
(f)
11) Install front differential housing according to installation proce-
dure described in Section 7E if removed.
12) Install rack and pinion assembly.
Refer to Section 3B1 for installation.
13) Refill front differential housing with gear oil if drained, referring
to Section 7E.
14) Install oil level gauge guide with new O-ring.
15) Refill engine with engine oil, referring to item "ENGINE OIL
CHANGE" in Section 0B.
16) Check wheel alignment, referring to Section 3.
ENGINE MECHANICAL (H25 ENGINE) 6A2-21
.
m (1.1 kg-m, 8.0 lb-ft)
.
m (2.7 kg-m, 19.5 lb-ft)
.
m (1.1 kg-m, 8.0 lb-ft)
.
m (1.1 kg-m, 8.0 lb-ft)
.
m (3.5 kg-m, 25.3 lb-ft)