Suzuki 2000 Grand Vitara SQ625 Service Manual page 405

1. Fuel feed hose
2. Fuel return hose
16) Disconnect following hoses at the location shown in figure:
17) Remove EVAP canister.
FRONT
18) Remove P/S pump ass'y. Refer to Section 3B1 for details.
19) Remove A/C compressor ass'y. Refer to Section 1B for details.
20) Remove steering shaft lower assembly. Refer to Section
21) Raise vehicle.
22) Remove front differential housing with differential from chassis
23) Remove exhaust No.1 pipe. Refer to item "EXHAUST MAN-
24) Remove exhaust manifold stiffener from transmission.
25) Remove A/T fluid hose clamps from engine mounting bracket.
26) Remove clutch housing lower plate.
27) Remove torque converter bolts (for A/T vehicle).
28) Remove starter motor.
29) Lower vehicle.
30) Support transmission. For A/T vehicle, don't jack under A/T oil
31) Remove bolts and nuts fastening cylinder block and transmis-
D Fuel feed hose from fuel feed pipe
D Fuel return hose from fuel return pipe
3C/3C1 for details.
if equipped. Refer to Section 7E for removal.
IFOLD" in this section for removal.
(for A/T vehicle)
pan to support transmission.
sion.
ENGINE MECHANICAL (H25 ENGINE) 6A2-81