Suzuki 2000 Grand Vitara SQ625 Service Manual page 523

6B-18 ENGINE COOLING
6) Remove P/S oil tank stay bolts (1) from radiator stay.
7) Remove radiator shroud securing clips.
8) Then remove cooling fan/clutch and radiator shroud.
9) Disconnect water inlet and outlet hose (1), (2) and reservoir
tank hose (3) from radiator.
10) Remove radiator (4).
INSPECTION
Check radiator for leakage or damage. Straighten bent fins, if any.
CLEAN
Clean frontal area of radiator cores.
INSTALLATION
Reverse removal procedures, noting the followings.
_ Refill cooling system with proper coolant referring to "COOLANT"
and steps 8) to 10) of "COOLING SYSTEM FLUSH AND REFILL"
in this section.
_ Adjust cooling fan belt tension to specification. Refer to "COOLING
FAN BELT TENSION CHECK AND ADJUSTMENT" in this sec-
tion.
_ With A/T vehicle, check A/T fluid level, referring to Section 7B1.
_ After installation, check each joint for leakage.