Timing Chain Cover - Suzuki 2000 Grand Vitara SQ625 Service Manual

6A4-22 ENGINE MECHANICAL (J20 ENGINE)

TIMING CHAIN COVER

1. Water bypass pipe
2. Water bypass hose No.2
3. Cooling fan pulley
REMOVAL
1) Disconnect negative cable at battery.
2) Drain engine oil.
3) Drain coolant.
4) Remove oil pan and oil pump strainer.
5) Remove cylinder head cover.
6) Remove water bypass pipe and bypass hose No.2.
7) Remove cooling fan and fan shroud referring to Section 6B.
8) Remove generator belt by turning generator belt tensioner
9) Remove water pump pulley.
10) Remove generator belt tensioner.
4. Water pump pulley
5. Generator belt
tensioner
Refer to item "OIL PAN AND OIL PUMP STRAINER" in this
section for removal.
Refer to item "CYLINDER HEAD COVER" in this section for re-
moval.
And then remove cooling fan belt and cooling fan pulley.
center bolt clockwise to loosen tension of generator belt. Refer
to Section 6H for removal.
1. Cylinder head cover
2. Cylinder head cover
gasket
3. Cylinder head side seal
4. O-ring
5. Oil pan
6. Oil pump strainer
7. Timing chain cover
8. Crankshaft pulley
9. Crankshaft pulley bolt
10. Oil seal