Suzuki 2000 Grand Vitara SQ625 Service Manual page 607

ENGINE AND EMISSION CONTROL SYSTEM (H25 ENGINE) 6E2-19
Removal
1) Disconnect negative cable at battery.
2) Drain cooling system.
3) Remove strut tower bar.
4) Disconnect accelerator cable (1) and or A/T throttle cable (2)
from throttle body.
5) Disconnect water hose (3) from throttle body.
6) Remove surge tank cover.
7) Remove intake air pipe (1) and surge tank pipe (2).
8) Disconnect connector of injector wire.
9) Disconnect connectors of TP sensor (2), MAF sensor (1) and
IAC valve (3).
10) Disconnect ground terminal (6) from intake manifold (5).
11) Remove clamp bracket (4) from intake collector.
12) Disconnect connectors of EVAP canister purge valve (1) and
EGR valve (5) (if equipped).
13) Disconnect PCV hose (6), breather hose (3) and EVAP canis-
ter purge valve hose (2).
14) Remove EGR pipe (4).