Suzuki 2000 Grand Vitara SQ625 Service Manual page 286

6A1-44 ENGINE MECHANICAL (G16 ENGINE)
1. Valve cotters
DISASSEMBLY
1) For ease in servicing cylinder head, remove intake manifold with
2) Remove intake rocker arm with clip from rocker arm shaft, re-
3) Using special tool (Valve lifter), compress valve springs and then
4) Release special tool, and remove spring retainer and valve
5) Remove valve from combustion chamber side.
6) Remove valve stem oil seal from valve guide, and then valve
1. Valve stem oil seal
2. Valve spring seat
7) Using special tool (Valve guide remover), drive valve guide out
8) Place disassembled parts except valve stem seal and valve
throttle body and exhaust manifold from cylinder head.
move rocker arm shaft bolts and remove exhaust rocker arms
and springs by pulling its shaft out to transmission side.
remove valve cotters by using special tool (Forceps) as shown.
Special Tool
(A): 09916-14510
(B): 09916-14910
(C): 09916-84511
spring.
spring seat.
NOTE:
Do not reuse oil seal once disassembled. Be sure to use
new oil seal when assembling.
from combustion chamber side to valve spring side.
Special Tool
(A): 09916-44910
NOTE:
Do not reuse valve guide once disassembled. Be sure to
use new valve guide (Oversize) when assembling.
guide in order, so that they can be installed in their original posi-
tion.