6A1-66 ENGINE MECHANICAL (G16 ENGINE)
16) Remove right side transmission stiffener from transmission
and cylinder block (A/T).
17) Remove clutch housing (torque converter housing) lower
plate.
18) Remove torque converter bolts (A/T).
Special Tool
(A): 09927-56010
19) Remove nuts fastening cylinder block and transmission.
20) Lower vehicle.
21) Support transmission with jack.
With A/T vehicle, don't jack under A/T oil pan to support trans-
mission.
22) Install lifting device.
23) Remove engine mounting bracket nuts (R & L).
24) Before lifting engine, check to ensure all hoses, electric wires
and cables are disconnected from engine.
25) Remove engine assembly from chassis and transmission by
lifting a little, sliding towards the front side, and then carefully
hoist engine assembly.