6C-4 ENGINE FUEL
1. Fuel feed hose
(if equipped)
2. Fuel return hose
3. Fuel vapor hose
4. Clamp
INSTALLATION
Reverse removal procedure noting the following.
D Upon completion of installation, verify that there is no fuel leakage
1. Fuel filter
2. Fuel filter outlet hose
3. Fuel filter inlet hose
FUEL LINES
NOTE:
Due to the fact that fuel feed line is under high pressure, this
system requires special consideration for service.
The feed pipe uses screw couplings and hose clamps.
1. To delivery pipe
2. Fuel tank
3. Fuel filter
INSPECTION
Visually inspect fuel lines for evidence of fuel leakage, hose crack-
ing and deterioration, or damage. Make sure all clamps are secure.
Replace parts as needed.
at each connection referring to SECTION 6 or SECTION 6-1.