Suzuki 2000 Grand Vitara SQ625 Service Manual page 295

4) Reverse removal procedure for installation.
5) Adjust water pump drive belt tension, referring to "ENGINE
COOLING" section.
6) Adjust power steering pump belt tension or A/C compressor
belt tension, if equipped. Refer to section 0B.
7) Adjust intake and exhaust valve lashes as previously outlined.
8) Adjust accelerator cable play and A/T throttle cable play. Refer
to section 6E1.
9) Check to ensure that all removed parts are back in place.
Reinstall any necessary parts which have not been reinstalled.
10) Refill cooling system referring to "ENGINE COOLING" section.
11) Connect negative cable at battery.
12) Verify that there is no fuel leakage, coolant leakage and ex-
haust gas leakage at each connection.
13) Confirm that ignition timing is within specification referring to
"IGNITION SYSTEM (FOR G16 ENGINE)" section.
ENGINE MECHANICAL (G16 ENGINE) 6A1-53