Honda 1998 VT750C Service Manual page 258

Install the mainshaft and countershaft to the left
crankcase as assembly.
NOTE:
• Do not forget to install the transmission end
washer.
• When mainshaft and countershaft installation,
be careful not to damage the countershaft oil
seal.
CRANKSHAFTjTRANSMISSION
NOTE:
"L" MARK "C" MARK "R" MARK
Each shift fork has an identification mark; "R" is for
the right shift fork, "L" is for the left shift fork and
"C" is for the center shift fork.
Install the shift forks to the grooves of the shifter gear
with their marks facing up (toward right crankcase
side).
Install the shift drum by aligning the guide pins on
the shift fork with the guide grooves of the shift
drum.
LEFT SHIFT ............... I
FORK
~
I
~
RIGHT SHIFT
~
FORK
12-19