Honda 1998 VT750C Service Manual page 282

FRONT WHEEL/SUSPENSION/STEERING
ASSEMBLY
Drive in a new right bearing squarely with the mark-
ing side facing up until it is fully seated.
Install the distance collar.
Drive in a new left bearing squarely with the marking
side facing up until it is fully seated.
~
S
DUST SEAL
DISTANCE COLLAR
TOOLS:
Driver
Attachment, 42 X 47 mm
Pilot,20 mm
07749 - 0010000
07746 - 0010300
07746 - 0040500
BEARING
• . , 42 Nom (4.3 kgfom,
____ .31 Ibf°ft)
/
DISC
Assemble the wheel as follows if the wheel is
disassembled.
Clean the spoke nipple threads.
Measure the hub width B.
Calculate the distance A as following:
A=79 mm-B/2
13-17