Honda 1998 VT750C Service Manual page 262

Install the right crankcase to the left crankcase.
Install and tighten the right crankcase bolts in a criss-
cross pattern in several steps.
TORQUE: 8 mm bolt: 23 N·m (2.3 kgf·m, 17 IbMt)
Install and tighten the left crankcase bolts in a criss-
cross pattern in several steps.
TORQUE: 8 mm bolt: 23 N·m (2.3 kgf·m, 17 Ibf·ft)
Clean and apply a locking agent to the mainshaft
bearing set plate bolt threads.
Install the mainshaft bearing set plate.
Install and tighten the mainshaft bearing set plate
bolts securely.
CRANKSHAFT/TRANSMISSION
RIGHT CRANKCASE
6 mm BOLTS
12-23