Honda 1998 VT750C Service Manual page 291

FRONT WHEEL/SUSPENSION/STEERING
NOTE:
Check that the fork tube moves smoothly in the fork
slider. If does not, check the fork tube for bending
or damage, and bushings for wear or damage.
Using quick successive motions, pull the fork tube
out of the fork slider.
Remove the oil lock piece from the fork slider.
OIL LOCK PIECE
/
I
SLIDER
)
Do not remove the
fork tube bushing
unless
it
is
necessary to
replace it with
a
new one.
13-26
Remove the oil seal, back-up ring and slider bushing
from the fork tube.
Carefully remove the fork tube bushing by plying
the slot with a screwdriver until the bushing can be
pulled off by hand.
OIL SEAL
/
BACK-UP RING
SCREW DRIVER
/
FORK TUBE BUSHING
SLIDER BUSHING
)