Steering Stem - Honda 1998 VT750C Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Install the brake caliper to the left front fork.
Install and tighten the new front caliper mounting
bolts to the specified torque.
TORQUE: 30 N·m (3.1 kgf.m, 22 Ibfoft)
Install the front fender with the brake hose clamp.
Install and tighten the mounting bolts securely.
)
STEERING STEM
If the handlebar
lower holders will
be removed,
loosen the lower
holder nuts before
removing the
upper holders.
VT750Cand
VT750CDICD2
(98-2000) :
13-34
REMOVAL
Remove the following:
- Front wheel (page 13-13)
- Handlebar (page 13-6)
Disconnect the speedometer cable from the
speedometer.
Remove the speedometer stay mounting bolts.
Remove the speedometer and stay as an assembly.
Remove the nuts, washers and handlebar lower
holders.
SPEEDOMETER
STAY