Engine Installation - Honda 1998 VT750C Service Manual

ENGINE REMOVAL/INSTALLATION
Remove the swingarm pivot bolt caps.
Remove the swingarm pivot nut, lock nut, pivot bolt
and collars.
CAUTION:
During engine removal, hold the engine securely
and be careful not to damage the frame, engine and
radiator fin.
Remove the engine from the right side ofthe frame.
ENGINE INSTALLATION
CAUTION:
Carefully align the mounting points with the jack
to prevent damage to engine, frame, wires and
cables.
NOTE:
• All the engine mounting bolts and nuts loosely
install, then tighten the bolts and nuts to the
specified torque.
• At engine installation, temporarily install the drive
chain to the gearshift spindle.
• Be sure to install the mounting collars and
swingarm dust seals in their correct positions.
Use a floor jack or other adjustable support to
carefully maneuver the engine in to place.
Carefully align the bolt holes in the frame and
engine.
I,
~~ ~ 7-8
Install the swingarm pivot collars, pivot bolt and nut.
Tighten the swingarm pivot bolt and nuts to the
specified torque.
- Tightening procedure (page 14-26).
Install the swingarm pivot bolt caps.
!
,i
,,;