Handlebar; Grip Replacement - Honda 1998 VT750C Service Manual

HANDLEBAR
GRIP REPLACEMENT
FRONT WHEEL/SUSPENSION/STEERING
THROTILE GRIP
Remove the throttle grip from the handlebar (page
13-8).
Remove the grip from the throttle grip.
Apply Pro-Honda Handgrip Cement or equivalent
Honda Bond A to the inside surface of the throttle
grip to the clean surface ofthe throttle pipe. Wait 3-
5 minutes and install the grip. Rotate the grip for
even application of the adhesive.
Install the throttle grip to the handlebar (page 13-
10).
PRO-HONDA HANDGRIP CEMENT
OR EOIUVALENT
Remove the left handlebar grip from the handlebar.
,.
~
HANDLEBAR GRIP
Apply Pro-Honda Handgrip Cement or equivalent to
the inside surface of the left handlebar grip to the
clean surface of the handlebar. Wait 3-5 minutes
and install the grip. Rotate the grip for even
application of the adhesive.
NOTE:
Allow the adhesive to dry for an hour before using.
Check for smooth throttle operation after the right
grip is installed.
PRO-HONDA HANDGRIP CEMENT
OR EOIUVALENT
LEFT HANDLE GRIP
13-5