Honda 1998 VT750C Service Manual page 297

FRONT WHEEL/SUSPENSION/STEERING
Install the washer.
Install the spring spacer.
WASHER
SPACER
•
Apply fork oil to the new a-ring and install the new
a-ring to the fork cap.
Install the fork cap into the fork tube.
NOTE:
Tighten the fork cap after installing the fork tube into
the fork bridge.
INSTALLATION
VT750COIC02lC03:
Install the lower fork cover to the steering stem.
Install the front fork to the steering stem, then tighten
the bottom bridge pinch bolt to temporarily hold
the fork in place.
13-32
• . . . . O-RING
----
FORK CAP