Speedometer - Honda 1998 VT750C Service Manual

LIGHTS/METERS/SWITCHES
Remove the bulb socket from the speedometer.
Remove the speedometer bulb from the bulb socket.
Replace a new bulb and install it in the reverse order
of removal.
SPEEDOMETER
VT750C3IC03 and
INSPECTION
VT750COIC02
(after2000):
Check that the main fuse (30 A) or sub-fuse (10 A,
15 A) is not blown.
Remove the speedometer (page 19-12).
Disconnect the speedometer 9P connector.
Turn the ignition switch ON and measure the voltage
at the 9P connector wire harness side.
CONNECTION: Black/Brown
(+) -
Green/Black
H
STANDARD: Battery voltage
If there is no voltage, check the related circuit for
open or short circuit.
If the related circuit is normal, temporarily disconnect
the battery positive terminal and reset the meter (see
Owner's manual) and inspect again.
19-10
BULB
9P CONNECTOR
9P CONNECTOR