Camshaft Removal - Honda 1998 VT750C Service Manual

CYLINDER HEAD/VALVES
CAMSHAFT REMOVAL
NOTE:
• The camshaft can be serviced with the engine in
the frame.
• The front cylinder camshaft service using the
same procedure as for the rear cylinder.
Remove the front cylinder head cover (page 10-5).
Remove the crankshaft hole cap and timing hole cap
from the left crankcase cover.
Remove the camshaft end holder bolts and camshaft
end holder.
Remove the dowel pins.
Turn the crankshaft counterclockwise and align the
oFT" mark (rear cylinder: °RT" mark) with the index
mark on the left crankcase cover.
For rear cylinder mark sure the rear cylinder is at
TOe (top dead cen-ter).
10-8
OFT" MARK