Rear Brake - Honda 1998 VT750C Service Manual

Connect the brake stopper arm to the brake panel
with bolt, seat washer, washer and nut.
Tighten the nut to the specified torque.
TORQUE: 20 N·m (2.0 kgf.m, 14 Ibf·ft)
Install the new cotter pin and bend back it securely.
Connect the brake rod to the brake arm.
Adjust the drive chain (page 3-18) and rear brake
pedal free play (page 3-24).
Tighten the axle nut.
TORQUE: 93 N·m (9.5 kgf·m, 69 Ibf·ft)
REAR BRAKE
REMOVAL
Remove the rear wheel (page 14-3).
Remove the brake panel from the rear wheel (page
14-4).
INSPECTION
Measure the brake drum I.D.
SERVICE LIMIT: 181 mm (7.13 in)
Measure the brake lining thickness.
SERVICE LIMIT: 2 mm (0.1 in)
REAR WHEEL/BRAKE/SUSPENSION
. . . , COTTER PIN
~
14-11