Honda 1998 VT750C Service Manual page 172

Install the seven clutch plates and seven clutch discs
A alternately, and then install the pressure plate to
the clutch center.
Install them in the clutch outer as an assembly.
CLUTCH PLATE
JUDDER SPRING
CLUTCH DISC B
SPRING SEAT
NOTE:
When installing the clutch disc B, align the end
groove in the clutch outer with the tabs of disc.
Install the clutch assembly to the mainshaft.
Install the thrust washer.
Install the new spring washer with its "OUT SIDE"
mark facing out.
Apply oil to the new clutch center lock nut threads.
Install the lock nut.
CLUTCH/GEARSHIFT LINKAGE
PRESSURE PLATE
8-19