Ignition Control Module (Icm); Ignition Coil - Honda 1998 VT750C Service Manual

If the value at the ignition pulse generator is normal,
but abnormal at the ignition control module (ICM):
• Open circuit in the ignition pulse generator wires
• Loosen connection in the ignition pulse generator
connector
If both values are abnormal:
• The ignition pulse generator is likely to be faulty.
Check and perform troubleshooting on page 17-3.
• For ignition pulse generator replacement, refer to
section 8.
IGNITION CONTROL MODULE (ICM)
REMOVAL/INSTALLATION
Remove the seat (page 2-2).
Remove the ignition control module OCM) from the
battery case cover.
Disconnect the 16P connector.
Installation is in the reverse order of removal.
IGNITION COIL
REMOVAL/INSTALLATION
FRONT:
Disconnect the spark plug caps from the spark plugs.
Remove the fuel tank (page 2-4).
Disconnect the ignition coil primary wires from the
terminals.
Remove the bolts and ignition coil.
Installation is in the reverse order of removal.
IGNITION SYSTEM
17-7