Honda 1998 VT750C Service Manual page 152

Install and tighten the gearshift arm pinch bolt to
the specified torque.
TORQUE: 12 Nom (1.2 kgfom, 9lbf°ft)
Install the collar, left rear cover, rubber, washer and
bolt.
Tighten the bolt to the specified torque.
TORQUE: 12 Nom (1.2 kgfom, 9lbf°ft)
Install the washer and clip to the securely.
NOTE:
After installation, turn the clip clockwise and down
behind the left rear cover.
Adjust the drive chain slack (page 3-181.
ENGINE REMOVAL/INSTALLATION
LEFT REAR COVER
\
/
RUBBER~'
\
.
@{~
r'\
BOLT WASHER
7-13