Transmission - Honda 1998 VT750C Service Manual

CRANKSHAFT/TRANSMISSION
After tightening, check that the connecting rods
move freely without binding.
Apply molybdenum disulfide oil to the main bearing
sliding surfaces and install the crankshaft to the left
crankcase.
Assemble the crankcase (page 12-22).
TRANSMISSION
REMOVAL
Separate the crankcase (page 12-4).
Remove the shift fork shaft from the shift fork.
Remove the shift drum and shift fork.
Do not forget to
Remove the mainshaft and countershaft from the
install the
left crankcase as assembly.
transmission end
washer.
DISASSEMBLY
NOTE:
• Keep track of the disassembled parts (gears,
bushings, washers, and snap rings) by stacking
them on a tool or slipping them onto a piece of
wire .
• Do not expand the snap ring more than necessary
for removal. To remove a snap ring, expand the
snap ring and pull it off using the gear behind it.
Disassemble the mainshaft and countershaft.
12-12
MAINSHAFT
j
COUNTERSHAFT