Honda 1998 VT750C Service Manual page 296

FRONT WHEEL/SUSPENSION/STEERING
Install the stopper ring into the groove in the fork
slider.
Apply fork oil to the lip a new dust seal and install
the dust seal.
Pour half the required amount of the recommended
fork oil in the fork tube.
. - ' . . DUST SEAL
~
RECOMMENDED FORK Oil:
Pro-Honda Suspension Fluid SS-8 or equivalent
Oil CAPACITY:
514± 2.5 cm
3
(17.4± 0.08 US
OZ,
18.0± 0.09 Imp oz)
Slowly pump the fork tube several times to remove
trapped air.
Pour additional oil up to the specified capacity and
repeat the above step.
Compress the fork leg fully.
Measure the oil level from the top of the fork tube.
SPECIFIED
LEVEL
Oil lEVEl: 108 mm (4.3 in)
Install the fork spring into the fork tube.
13-31