Clutch Plate; Clutch Center; Clutch Outer; Clutch Outer Guide - Honda 1998 VT750C Service Manual

CLUTCH/GEARSHIFT LINKAGE
Replace the discs
and plates as a
set.
CLUTCH PLATE
Check the plate for excessive warpage or discol-
oration.
Check the plate warpage on a surface plate using a
feeler gauge.
SERVICE LIMIT: 0.30 mm (0.012 in)
CLUTCH CENTER
Check the clutch center for nicks, indentations or
abnormal wear made by the clutch plates.
CLUTCH CENTER
\
'-
--
....
8-8
CLUTCH OUTER
Check the clutch outer for nicks, indentations or
abnormal wear made by the clutch discs.
Check the serrated teeth of the primary driven gear
for wear or damage.
Check the needle bearing for wear or damage; replace
as a necessary (page 8-9).
CLUTCH OUTER GUIDE
Measure the clutch outer guide.
SERVICE LIMITS: 1.0. : 22.03 mm (0.867 in)
0.0. : 29.98 mm (1.180 in)
t'