Front Wheel; Vt750Cd/Cd2 (After 2000); Vt750C3/Cd3 - Honda 1998 VT750C Service Manual

FRONT WHEEL/SUSPENSION/STEERING
Apply grease to the clutch
lever
pivot bolt sliding
surface.
Install the clutch
lever
to the clutch
lever
bracket.
Install and tighten the bolt and nut securely.
Connect the clutch cable to the
lever.
Install the right and left
rearview
mirrors.
NOTE:
Route the cables, wires and harness properly (page
1-22).
Adjust the following:
- Throttle operation free play (page 3-4).
- Clutch
lever
free play (page 3-26).
FRONT WHEEL
mI!IIII! _
A contaminated brake disc or pad reduces stopping
power. Discard contaminated pads and clean
contaminated disc with
a
high quality brake
degreasing agent.
REMOVAL
Raise and support the motorcycle using a hoist or
jack.
CAUTION:
VT750C:
VT750CD/CD2
('98 - 2000) :
i
SCREW
VT750CD/CD2
(After 2000) : \ \
VT750C3/CD3 :
III
I ~ , - - - - - - - - - - - -
r~~~SCREW
',J
SPEED SENSOR
Do not jack up the motorcycle using the oil filter.
VT750C and Remove the screw and speedometer cable from the
VT750COIC02
speedometer gear.
('98 -2000):
VT750C31C03 and Remove
the screw and speed sensor from the
VT750COIC02
speedometer gear.
(after 2000):
Loosen the axle pinch bolts.
13-13