Honda 1998 VT750C Service Manual page 298

FRONT WHEEL/SUSPENSION/STEERING
VT750CDICD2ICD3:
Install the upper fork cover to the front fork.
Install and tighten the bolts securely.
Install the a-ring into the fork cover as shown.
NOTE:
Do not apply soapsuds or oil to the fork cover inner
surface when removing the fork cover.
Install the top bridge (page 13-42).
Loosen the bottom bridge pinch bolt.
Align the top of fork tube with the upper surface of
the top bridge.
Tighten the bottom bridge pinch bolt to the specified
torque.
TORQUE: 49 N'm (5.0 kgf'm, 36 Ibf.ft)
Tighten the fork cap to the specified torque, if
removed.
TORQUE: 22 N'm /2.2 kgf.m, 16Ibf.ft)
Tighten the top bridge pinch bolts to the specified
torque.
TORQUE: 26 N'm /2.7 kgf'm, 20 Ibf·ft)
a-RING
5 mm
(0.2 in)
max
13-33