Driven Flange Bearing Removal - Honda 1998 VT750C Service Manual

REAR WHEEL/BRAKE/SUSPENSION
Remove the collar.
Remove the driven flange from the left wheel hub.
NOTE:
If you will be disassemble the driven flange, loosen
the driven sprocket nuts before removing the driven
flange from the wheel hub.
Remove the damper rubbers and a-ring.
,- a-RING
DRIVEN FLANGE BEARING REMOVAL DUST SEAL
Remove the dust seal.
Remove the driven sprocket nuts and driven
sprocket.
,
DRIVEN SPROCKET
NUTS
14-5