Honda 1998 VT750C Service Manual page 224

Clean the cylinder head cover mating surface of the
cylinder head.
Install the rear cylinder head cover to the rear cylin-
der.
Apply engine oil to the rubber seals whole surface.
Install the rubber seals and washers.
Install and tighten the cylinder head cover bolts to
the specified torque.
TORQUE: 10 Nom (1.0 kgfom, 7 Ibfoft)
Install the removed side cylinder head fin and
mounting socket bolts.
Tighten the bolts to the specified torque.
TORQUE: 10 Nom (1.0 kgfom, 7lbfoft)
Install the cylinder head cover outer cover.
Install the cable guide and tighten the bolts securely.
CYLINDER HEAD/VALVES
CABLE
GUIDE
10-35