Front Brake Light Switch; Rear Brake Light Switch - Honda 1998 VT750C Service Manual
Hide thumbs
Also See for 1998 VT750C:
- Specifications and review (13 pages) ,
- Service interval and recommended maintenance manual (66 pages) ,
- Electrical repair and modification (25 pages)
Table of Contents
Advertisement
LIGHTS/METERS/SWITCHES
Remove the neutral switch.
Install and tighten the neutral switch to the specified
torque.
TORQUE: 12 N·m (1.2 kgf·m,9Ibfoft)
Connect the neutral switch connector.
FRONT BRAKE LIGHT SWITCH
NOTE:
The front brake light switch removal/installation
procedure is on pages 15-8,11.
Disconnect the front brake light switch connectors
and check for continuity.
There should be continuity with the front brake
applied and no continuity with it released.
REAR BRAKE LIGHT SWITCH
Remove the fuel tank (page 2-4).
Disconnect the rear brake light switch 2P (Black)
connector and check for continuity at the switch side
connector.
There should be continuity with the rear brake
applied and no continuity with it released.
19-16
NEUTRAL SWITCH
FRONT BRAKE LIGHT SWITCH
- Quick Links:
- Fuel System
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
