Dhcp Configuration - Huawei SmartAX MT882 User Manual

VPI: if you need any modification, please enter the VPI
value provided by ISP. See the attached table for all the
VPI default value of PVC.
VCI: if you need any modification, please enter the VCI
value provided by ISP. See the attached table for all the
VCI default value of PVC.
Encapsulation: you can select the mode LLC or VC MUX.
Default Route: this setting specified the default IP address
of MT882 is using for default route of LAN.
Username and Password: enter the username and
password provided by ISP.
Use DNS: it is recommended to keep this option as Enable,
indicating that when PPP dial applies for IP and gateway, it
also tries for DNS server IP at the same time. On the other
hand, keep this option as disable, indicating that obtaining
DNS server not from PPP dial, and needed to manually
type in the addresses of primary DNS server and
secondary DNS server on the DNS configuration page.
III. Save
Click the Apply button to save the settings in the RAM.
To save these configuration changes permanently, enter
the Tools>System Setting page, and click Save &
Restart button to save new settings.

4.4 DHCP Configuration

Click the DHCP of Home in the Wizard Column to set the DHCP
configuration. MT882 can be set as DHCP server.
Huawei Technologies Proprietary
41