Paper Jams At The Lever 2A And The Knob 3A When D2 Folder Unit Is Installed; Paper Jams At The Lever 2B And The Knob 2C When D2 Folder Unit Is Installed - Fuji Xerox ApeosPort-II C7500 Administrator's Manual

14 Problem Solving

Paper Jams at the Lever 2a and the Knob 3a when D2 Folder Unit is Installed

1
Make sure that the machine has
stopped before opening the right
cover of the finisher.
2
Move the lever 2a and turn the
knob 3a to the left. Remove the
jammed paper.
Note
3
Return the lever 2a to the original
position.
4
Close the finisher right cover.
Note

Paper Jams at the Lever 2b and the Knob 2c when D2 Folder Unit is Installed

1
Make sure that the machine has
stopped before opening the right
cover of the finisher.
14
2
Move the levers 2b and turn the
knob 3a to the right. Remove the
jammed paper.
Note
390
• If paper is torn, check for any
torn pieces of paper inside the
machine.
• A message will be displayed and the machine will not operate if the front cover of the finisher
is even slightly open.
• If paper is torn, check for any
torn pieces of paper inside the
machine.