Brake Hose Replacement - Rear (Rear Brake Hose) - GMC chervolet camaro 1999 Service Manual

)
Brakes
6. Install the front brake pipe to the brake hose.
7.
Install the brake hose retainer.
8.
Secure the retainer to the brake hose bracket
using the screw.
• Use a backup wrench on the hose fitting.
Ensure that the brake hose does not contact
any part of the suspension.
• Inspect the hose in the extreme right and
extreme left turn conditions.
Tighten
Tighten the front brake hose clip bolt/screw
to 13 N-m (115 lb in}.
9. Bleed the brake hydraulic system. Refer to
Hydraulic Brake System Bleeding (Manual Bleed)
or Hydraulic Brake System Bleeding (Pressure
Bleed) or Hydraulic Brake System Bleeding (When
To Bleed)
10. Install the tire and the wheel. Refer to Tire and
Wheel Removal and Installation (Wheel
Installation) in Tires and Wheels.
Brake Hose Replacement - Rear
(Rear Brake Hose)
Removal Procedure
1. Remove the wheel and the tire. Refer to Tire and
Wheel Removal and Installation (Wheel Removal)
in Tires and Wheels.
2. Clean all dirt and foreign material from the.hose
and fitting (4).
3. Remove the rear brake hose (2) from the rear
brake pipe (3). ·
• Use a backup wrench on the hose fitting (2).
• Do not bend the rear brake hose bracket or the
rear brake pipe (3).
4. Remove the rear brake hose retainer (1} from the
brake hose bracket and the rear brake hose (2).
5. Remove the following components from the rear
brake caliper (5):
• The brake hose fitting bolt ( 4}
• Two brake hose fitting gaskets.
Discard the brake hose fitting gaskets.
• The rear brake hose (2)
Hydraulic Brakes 5-39
1
222984