Default Profile Settings In Cp Conferencing Mode - Polycom realpresence 1800 Administrator's Manual

Conferencing Capabilities in the Different Conferencing Modes
Feature
Recording
Site Names
Message Overlay
* Entry Queue & Destination Conference must have the same profile (i.e. SVC only to SVC only, Mixed CP and SVC
to Mixed CP and SVC)
*** For AVC, the LPR error resiliency is used, however for SVC endpoints, new error resiliency methods are used
‡ Cascading is not supported on Collaboration Server (RMX) 1800 with no DSP cards.

Default Profile Settings in CP Conferencing Mode

The Collaboration Server is shipped with a default Conference Profile for CP conferences which allows
users to immediately start standard ongoing CP conferences. These are also the default settings when
creating a new Profile. The default settings are as follows:
Default CP Only Conference Profile Settings
Setting
Profile Name
Line Rate
Video Switching
Operator Conference
Encryption
Packet Loss Compensation (LPR
and DBA)
Auto Terminate
Auto Redialing
Exclusive Content Mode
TIP Compatibility
Enable FECC
Enabled Gathering Phase
Polycom®, Inc.
CP Only Mixed CP & SVC
 
AVC recording only
 
AVC endpoints only
 
AVC endpoints only
Value
Factory_Video_Profile
384Kbps
Disabled
Disabled
Disabled
Enabled for CP Conferences
• After last participant quits - Enabled
• When last participant remains - Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
Using Conference Profiles
SVC Only VSW
 

Managed by the
endpoint (not via
MCU)
 
.
25