Transporting The Printer - Oce CS9090 User Manual

Chapter 7: Maintenance
(2) After the transfer
Follow the steps below to prepare the printer to be used after the transfer.
Make sure that you place the printer on an adequate place.
Step 1 :
Notes
For connecting cables, refer to the following.
→ Connecting the power cable
→ Connecting the printer to your PC
Connect the power cable and other cables.
Step 2 :
Notes
For connecting cables, refer to the following.
→ Connecting the power cable
→ Connecting the printer to your PC
Perform a nozzle check to check if the printer head has clogged.
Step 3 :
Notes
To perform the nozzle check, refer to "NozzleCheck".
Perform a fine adjustment of image quality.
Step 4 :
Notes
To perform an adjustment of image quality, refer to "Alignment".

7.6.2 Transporting the printer

When you transport the printer, the printer should be repacked in the original box and packing materials, to
protect it from vibration or impact.
The printer should be in long store conditions.
Notes
•
When you transport the printer, contact your local Océ representative for assistance.
•
To LongStore your printer, please refer to the LongStore menu.
AP-75036 - Revision 1.3 – 20/03/06 172 User's Guide CS9000 series