Setup Menu 3/7; Roll Media Setup Menu; Roll Media Length Menu; Centronics Menu - Oce CS9090 User Manual

5.4.3 Setup Menu 3/7

5.4.3.1

Roll Media setup menu

Perform various settings for roll media.
Setup items Parameters
Roll media setup Disable
Roll media 1
Roll media 2
Roll media 3
-
5.4.3.2

Roll media length menu

Set media roll length.
Setup items Parameters
Roll media 1-4 1 m to <30 m>to 99 m
5.4.3.3

Centronics menu

Set communication mode to Centronics interface.
Setup items Parameters
Centronics Centronics
<Bi Centro>
-
AP-75036 - Revision 1.3 – 20/03/06
Description
Set this when roll media setup is not used.
For each setup value of roll media, 3 settings of "Roll media 1" - "Roll
media 3" can be set.
• [CANCEL] key: To shift to the previous hierarchy menu.
Description
To change roll media length by operating the
following keys.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
Description
To set communication mode to Centronics mode.
To set communication mode to Bi-Centronics mode.
To shift to the previous hierarchy menu.
105
Chapter 5: Handling the printer
User's Guide CS9000 series