Weekly Maintenance - Oce CS9090 User Manual

7.2.2 Weekly Maintenance

At the end of the week, ink has to be removed from some parts, so it cannot harden. Otherwise, some parts
will break down or result in bad print quality. After performing a weekly maintenance, do not forget to perform
the daily maintenance afterwards.
Power ON the printer and go to the "WiperClean-Menu". This will cause the unlocking of the
Step 1 :
carriage.
Clean the area around the caps with a polyknit wiper. If you see ink, dust or some thing else,
Step 2 :
clean it immediately so it can not influence the print quality.
Open the left maintenance covers by loosening the four screws.
Step 3 :
AP-75036 - Revision 1.3 – 20/03/06
1 Gloves
2 Polyknit wiper
1 Left Maintenance Cover 1
2 Screws fixing left maintenance cover 1
3 Left Maintenance Cover 2
4 Screws fixing left maintenance cover 2
153
Chapter 7: Maintenance
User's Guide CS9000 series