Step 13 : Wait until the Ink Refill sequence has finished, the display will show the remaining minutes, 9 min
for a 65" machine and 13 min for a 90" machine :
Please note that you have to wait 1 minute if the display mentions 0 minutes:
Step 14 : Empty the Waste bottle when the display requests it.
Notes
During ink installation, note the following.
•
Do not power off the printer.
•
Do not unplug the power cable.
•
Do not open the front cover.
Notes
This product has been tuned for the use of Océ IJC910 Low Solvent Ink cassettes. If other manufacturers'
products are used, drawing results become faint or ink ends are not properly detected, and the warranty will
not cover (repairs will require a fee) any resultant breakdown.
AP-75036 - Revision 1.3 – 20/03/06
51
Chapter 4: Preparing for a job
(or 9 min for 65" machines)
User's Guide CS9000 series