Printing By Distance Adjustment Menu; Cut Size Menu; Top Feed Menu - Oce CS9090 User Manual

5.4.1.19 Printing by Distance adjustment menu

Performs printing by distance adjustment.
Setup items Parameters
Dist.Adj Data printing
-

5.4.1.20 Cut size menu

When loading a sheet of media, set the method for detecting the size of the media.
Setup items Parameters
Cut Size <Auto>
Length
Width
-
Notes
•
When using sheet media other than recommended media, set to "blank form vertical" or "blank form
horizontal".
•
The following size of sheet media can be set.
o ISO series (A0, A1, A2, A3, A4)
o JIS series (B1, B2, B3, B4)
o ARCH series (A, B, C, D)

5.4.1.21 Top feed menu

Set the amount of media to be fed when printing begins. Make this setting when using roll media.
Setup items Parameters
Top feed <0mm>-400mm
AP-75036 - Revision 1.3 – 20/03/06
Description
Now printing by media feed compensation. Wait for a
while until printing has been finished.
• [CANCEL] key: to perform following operations :
• Media feed correction printing has been finished.
• To eject media.
• To shift to the previous hierarchy menu.
Description
The length and width of the sheet media is automatically detected.
When placing normal size sheet media vertically on the tray.
When placing normal size sheet media horizontally on the tray.
After setting, shift to the previous hierarchy menu.
Description
To feed media at the start of printing. Set when
printing on roll media.
• [F2] key: to increase the setup value.
• [F4] key: to decrease the setup value.
• [ENTER] key: to confirm the setup value
• [CANCEL] key: to cancel the setup value
93
Chapter 5: Handling the printer
User's Guide CS9000 series