Operating From The Operation Panel; Feeding Media - Oce CS9090 User Manual

5.5 OPERATING FROM THE OPERATION PANEL

This section describes functions operated on the operational panel when the printer is in the normal status.
Notes
For information of the name and function of each key, refer to "Operation panel".

5.5.1 Feeding media

When you want to feed media forward or backward, follow the steps below:
Verify the following regarding the condition of the printer.
Step 1 :
It is not currently printing
I)
Press the [F1] key of the operation panel.
Step 2 :
To shift to the feed & reel menu.
I)
Press the [F3] key or the [F4] key on the operation panel.
Step 3 :
The product will perform following operations:
I)
Setup items
Cut & Feed
Notes
If "Take-Up Roll" is set in the media detection setup menu, the product will not operate even if the [F4] key
has been pressed.
AP-75036 - Revision 1.3 – 20/03/06
Key name
F3
F4
Parameters
Forward
Backward
129
Chapter 5: Handling the printer
Description
Feeds media forward.
Feeds media backward.
User's Guide CS9000 series