Media Setup Menu; Media Type Menu - Oce CS9090 User Manual

Setup items Parameters
Test print (1/2) SetupPrint
NozzleCheck
Alignment (UniDir)
Alignment (BiDir)
Test print (2/2) Palette printing
Maintenance status
Test print (1/2-2/2) -
5.4.1.4

Media setup menu

Perform various settings for media.
Setup items Parameters
Media setting Type
Cut size
Top feed
Media cutting
-
5.4.1.5

Media type menu

Set media type for printing.
Setup items Parameters
Types (1/2) User media 1
User media 2
User media 3
User media 4
Types (2/2) User media 5
User media 6
User media 7
User media 8
Type (1/2-2/2) -
AP-75036 - Revision 1.3 – 20/03/06
Description
Performs setup printing.
Performs nozzle check printing.
Performs accuracy adjustment printing in one direction.
Performs accuracy adjustment printing in two directions.
Performs palette printing.
Maintenance status printing is performed.
[CANCEL] key: shift to the previous hierarchy menu.
Description
Sets the media type used for test printing.
To set the method for detecting the size of the media when sheet
media has been loaded.
Sets the amount of media to be fed when printing begins. Make this
setting when using roll media.
The method of cutting the media after printing is set here.
[CANCEL] key: to shift to the previous hierarchy menu.
Description
To set the type of media used for printing.
For setup values of printing operation, eight settings of "user media 1-
8" can be set.
[CANCEL] key: to shift to the previous hierarchy menu.
87
Chapter 5: Handling the printer
User's Guide CS9000 series