6.4
Moving or transporting the printer
6.4.1
Moving the printer
CAUTION
Move the printer maintaining a horizontal position.
Do not slant the printer, prop it against a wall or turn it upside down.
There is a possibility that ink inside the printer may leak.
Moreover, normal operation after shifting (to these positions) cannot be guaranteed.
(1) Preparation before moving
Step 1:
Make sure that the printer is switched OFF.
Step 2:
Dispose of waste fluid.
Step 3:
Remove all the cables, such as the power cable.
Step 4:
Loosen the four adjusters of the stand as shown in the next illustration.
Step 5:
Move the printer.
NOTE
The casters supplied with the dedicated stand are manufactured for little movement in flat
indoor areas, not for transporting equipment.
1
2
N°.
1
2
6.3 Disposal of waste fluids
1
Adjusters
Stands
6-144
3.2.2 switching the power OFF
1
Name
CS9360 User's Guide
2