Media Cut Menu - Oce CS9090 User Manual

Chapter 5: Handling the printer

5.4.1.22 Media cut menu

Set media cut method after printing.
Setup items Parameters
Media cutting Auto
Manual
Off
-
Notes
•
For the situations shown below, the media cut settings are always changed to "Off" regardless the
previous settings.
When "Take-up system" or "Roll-up/roll off system" is set for the media detection settings (Media
o
detection menu)
•
When using the media shown below, set the media cut setting to "Manual". If set to "Auto", the
following errors may occur :
Cloth material: The cloth fibre is not completely cut.
o
Media with glue: Glue will adhere to the cutting blade and decrease cutting performance.
o
AP-75036 - Revision 1.3 – 20/03/06
Description
After printing has been completed, the media is sent to the media cut
position and is automatically cut.
Feed media to the media cut position after printing.
Use regular cutting blades available from hardware stores.
No media feed after printing.
When "Auto" is selected, proceed to the Shortest Cut Length menu.
• If "Manual" or "Off" has been selected, the screen changes to the menu of
the previous hierarchy.
94 User's Guide CS9000 series