Testprinting - Oce CS9090 User Manual

4.7 TESTPRINTING

Follow the steps below to do a test print and confirm if your printer operates correctly.
Turn the power of the unit ON and load the media.
Step 1 :
Make sure that your printer is in normal status.
Step 2 :
Press either the [MENU ↑] key or [MENU ↓] key on the operation panel.
Step 3 :
The setup menu is displayed.
Press the [F3] key on the operation panel.
Step 4 :
"TestPrint: SetupPrint" is displayed on the LCD.
Select an item and press the appropriate key.
Step 5 :
Setup items Key name
Test Print (1/2) F1
F2
F3
F4
Test Print (2/2) F1
F2
Print the information on the selected item.
Step 6 :
After printing, the printer returns to the normal status.
Step 7 :
AP-75036 - Revision 1.3 – 20/03/06
Parameters Descriptions
Setup Perform Setup List.
Refer to 'Setup List'
Nozzle Check Perform Nozzle check.
Refer to 'Nozzle Check'
Adj. Uni-D Perform Alignment for the uni-direction printing.
Refer to 'Alignment'
Adj. Bi-D Perform Alignment for the bi-direction printing.
Refer to 'Alignment'
Palette Perform Colour Palette.
Refer to 'Colour Palette'
Maintenance Perform Maintenance record.
Refer to 'Maintenance record'
59
Chapter 4: Preparing for a job
User's Guide CS9000 series