Oce CS9090 User Manual page 48

Chapter 4: Preparing for a job
First ink load procedure:
Verify if the Waste bottle is empty.
Step 1 :
Power ON the unit.
Step 2 :
Remove all dummy cassettes as indicated on the display.
Step 3 :
The CS9000 will start pumping air for about 15 seconds.
The following message will be displayed.
Step 4 :
The head will be unlocked. Moisten the caps with Low Solvent Cleaning Liquid.
Step 5 :
Install the 8 NEW Low Solvent Setup Cleaning cassettes (2) as requested on the display. See
Step 6 :
images below.
The display will show the remaining minutes, 9 min for a 65" machine and 13 min for a 90"
machine:
AP-75036 - Revision 1.3 – 20/03/06 48
(or 9 min for 65" machines)
User's Guide CS9000 series