Introduction; Periodical Services Done By End User - Oce CS9090 User Manual

Chapter 7: Maintenance

7.1 INTRODUCTION

This chapter explains the necessary daily, weekly and monthly maintenance of the printer. Be sure to
perform the recommended maintenance strictly. If not, Océ does not guarantee constant printing quality.

7.2 PERIODICAL SERVICES DONE BY END USER

This section describes the periodical services required for this machine. The periodical services ensure
stable printout quality of the machine. In the periodical services, some service parts may be checked,
cleaned, or replaced.
Perform periodical inspections according to the table below.
N Action
Clean wipers
1
Flush caps in maintenance station
2
Clean the edges of the caps in maintenance station
3
Clean the area around the caps
4
Clean around bottom of the heads
5
Change the wipers
6
Change upper sponge at back of the capping station
7
Replacing the sponge in the spitting box
8
Notes
•
All cleaning in "Ink areas" must be done with Océ Low Solvent cleaning solution.
•
Above maintenance cycle is based on use:
8 hours / day, 5 days / week and 44 weeks / year.
If machine is used more, maintenance periods will come earlier.
AP-75036 - Revision 1.3 – 20/03/06
Frequency
Daily maintenance
Weekly maintenance
Monthly maintenance
2 weekly maintenance
150 User's Guide CS9000 series